All

All
Products
News
Introduction

What are the reasons for the uneven wall thickness of the blister tray?

Time:

2022-12-06

What are the reasons for the uneven wall thickness of the blister tray? Blister products are mainly PVC hard sheet, PS hard sheet, PET hard sheet, blister tray wall thickness is not uniform mainly because the design is not reasonable, heating temperature is not well controlled and so on.

What are the reasons for the uneven wall thickness of the blister tray?

Blister products are mainly PVC hard sheet, PS hard sheet, PET hard sheet, blister tray wall thickness is not uniform mainly because the design is not reasonable, heating temperature is not well controlled and so on.

1. Unreasonable design leads to uneven wall thickness in some areas of the blister tray during processing. In our normal production process, due to the dead Angle of product design, uneven stress during material processing will lead to uneven wall thickness. So in the design process of the blister tray, we should also pay attention to the structure of the blister tray to be reasonable.

2. The heating temperature of the blister tray is not well controlled, and the temperature is unstable in the processing process, resulting in uneven heating and uneven wall thickness in the processing process. In the process of processing, we strengthen the alarm control of each link of the temperature, strictly control the temperature, reduce the uneven wall thickness of the blister tray caused by temperature.

3, the processing time of the blister tray will also affect the wall thickness of the blister tray, the length of time has a great impact on the temperature and heating time, the processing time of the blister tray is too long will lead to the accuracy of the blister tray, the time is too short, the temperature is not enough will also affect the processing accuracy of the blister tray.

4, the uneven wall thickness of the blister tray also has an impact on the blister process. If the blister is too deep, it will also cause the phenomenon of uneven wall thickness of the blister tray. The uneven wall thickness of the blister tray will make the product effect of the blister tray is not good, so we need to be more careful when processing according to the requirements, and use certain methods to improve the product effect of the blister tray, improve the product effect of the blister tray.

Huizhou Xinweiyi Industrial Co., Ltd.

Tel：135 1666 2893 （Mr. Huang）

E-mial：hwc@hzxwy.cn
Add：1st Floor, No.1 Longhu 6th Road, Shuikou Street, Huicheng District, Huizhou